 Photovoltaic module salt spray corrosion test chamber

1. The main indicators of the instrument:

  Size: 2 modules can be put down (maximum module size 2400mm×1400mm)

  Dimensions reference: specifications of mainstream double-glass modules, shingled modules, and 72cells PERC modules

  Test temperature: 35±2°C

  Temperature uniformity: ≤2°C

  Salt mist settlement: 1~2ml/80cm2 h

  Maximum displacement: 30Kg/24 hours

  Air source: pressure 0.2~0.7MPa, air volume 0.25m2/h

  Power supply: 380V, three-phase four-wire + protective ground wire, 15KW

2. The main performance of the instrument:

  PVC board in the inner chamber, stainless steel board in the outer shell, good thermal insulation performance.

  Side door, good sealing.

  A component chute is installed in the room to facilitate the movement of components.

  Automatic water supply, can automatically replenish when the water level is insufficient.

  Precision glass nozzles spread the mist evenly.

  It is equipped with double over-temperature protection and low water level warning to ensure safe use.

  Temperature control: accuracy 1°C, resolution 0.1°C

  Heating, humidification, gas delivery system, from outside to inside.

  Compressed air can quickly defog, and this function can be used when the test is terminated or temporarily shut down.